Bong Cleaners

Q: What is the quickest way to clean a glass bong or pipe?

1. Empty the bong of its contents, then rinse thoroughly with warm water. 2. Disassemble the bong, removing the individual components such as the pipe and mouthpiece. 3. Pour in the bong cleaner solution. 4. Plug any holes with your fingers and give it a good shake. Then leave it for a few minutes to let the solution do its job. 5. For the smaller pieces, you can place them in a sealable plastic bag, pour in the solution, and leave them to soak. 6. Use a pipe cleaner to remove any hardened dirt left in the bong and to clean the inside of the pipe and mouthpiece. 7. Rinse off any excess solution and then leave to dry

Bong cleaner is very important when it comes to maintaining your bong, ensuring you get years of use out of it and you can enjoy a clean smoke each time you use it. Over time, substances can build up, impacting the flavor and causing discoloration.

Not only is bong cleaner very affordable but the cleaning process is also very simple.

Silicone Plug Set for Bongs | 14.5mm and 18.8mm

Market

£6.99

Member

£129.00

Elite

£99.00

-50%

Bong Blaster Bong Cleaner Starters Kit

Market

£9.99

Member

£129.00

Elite

£99.00

ROOR - Glass Cleaning Stopper

Market

£9.99

Member

£129.00

Elite

£99.00

-33%

G-Spot Glass - Rubber Stopper - Joint Plug

Market

£2.99

Member

£129.00

Elite

£99.00

Bong Cleaner - Why is it needed?

Maintaining and cleaning your smoking equipment is essential if you are going to enjoy a smooth smoke each time. A dirty bong can look nasty, smell funky, impart an unpleasant taste to your smoke, and even lead to a harsh hit that will send you reeling.

Tars and resins naturally accumulate inside your bong as you smoke through it. Though some of it is caught in your bong water (regularly rinsing and changing the bong water can go a long way towards maintaining a clean bong,) eventually this build-up can sometimes prove tricky to remove.

Bong Cleaner Solutions

With the right bong cleaner solution, all of the nasty gunk in your bong is easily loosened from its sticky bonds. Then all you need to do is drain off the solution, give the bong a good rinse with hot water, and your glass should be good as new.

This is much less of a headache than working at it with scrubbing brushes might be!

Not only that, using an abrasive method like scrubbing will create tiny scratches in your glass over time. While this isn’t something you’ll notice immediately, over the months or years it can lead to a cloudy, worn appearance.

It can also make your bong dirtier over time, as these tiny scratches give tar and resin a place to hide and accumulate.

The best way to avoid all of this is regular maintenance with a high-quality bong cleaner solution. Though it might sometimes still be necessary to use a gentle pipe cleaner or brush to remove particularly stubborn build-up, you can minimize the wear on your glass by relying on a gentle bong cleaning solution in place of scrubbing.

Pipe Cleaners and Brushes

It’s always good to have a few pipe cleaners and brushes handy. These can be used in a pinch to remove clogs or to tackle that particularly stuck-on resin that your cleaning solution can’t free up on its own.

Pipe cleaners are made from long flexible wires and coated with a soft, absorbent fabric. This makes them perfect for dislodging and picking up any gunk that works its way into your bong.

Bong Cleaners - Frequently Asked Questions

FAQ

What is the quickest way to clean a glass bong or pipe?

Empty the bong of its contents, then rinse thoroughly with warm water.
Disassemble the bong, removing the individual components such as the pipe and mouthpiece.
Pour in the bong cleaner solution.
Plug any holes with your fingers and give it a good shake. Then leave it for a few minutes to let the solution do its job.
For the smaller pieces, you can place them in a sealable plastic bag, pour in the solution, and leave them to soak.
Use a pipe cleaner to remove any hardened dirt left in the bong and to clean the inside of the pipe and mouthpiece.
Rinse off any excess solution and then leave to dry.

Can Bong Cleaner dissolve hardened resin?

Bong Cleaner can help to dissolve annoying hardened resin from your bong, as it contains IPA (isopropyl alcohol). Using this solution, you can remove dried-on resin without causing any damage to the bong itself.